Torches
Donze has developed a high-speed steel cutting torch that cuts steel at 600mm/min. (36 in./min) on 240mm (8-3/4 in.) thick steel on continuous casting machines (hot) and as high as 250mm/min (12 in./min) per minute on cold steel of the same thickness.
- Stainless steel barrel with brass tip construction prevents overheating
- Post mix design prevents flashback
- Combines the most efficiently gas and oxygen, resulting in a superior cutting quality at a reduced consumption
- Manufactured with high alloyed, heat resistant and stainless steel
Machine Cutting Torches
Torch MDZ853 :
- Compatible with MDZ853 nozzles
- Made for Billets, Blooms, Slabs and Scrap
- Can be used on hot and cold products
- Made to cut thickness from 120 to 600mm (4,7 to 23,6 inches / 0,4 to 1,97 feet)
Options :
- Water cooling
- Length & fittings on request
- Iron powder injection system
Torch MDZ1053 :
- Compatible with MDZ1053 nozzles
- Made for scrap cutting
- Made to cut thickness from 400 to 800mm (15,75 to 31,5 inches / 1,31 to 2,62 feet)
Options :
- Water cooling
- Length & fittings on request
- Iron powder injection system
Torch MDZ2053 :
- Compatible with MDZ2053 nozzles
- Made for scrap cutting
- Made to cut thickness from 800 to 2000mm (4,7 to 23,6 inches / 0,4 to 1,97 feet) – for more, contact us
Options :
- Water cooling
- Length & fittings on request
- Iron powder injection system
Torch G2
- Compatibles with G2 nozzles
- Made to cut thickness from 300 to 800mm ( 11,8 to 31,5 inches / 0,98 to 2,62 feet)
Options :
- Water cooling
- Length & fittings on request
Manual Cutting Torches
Torch MDZ853 :
- Compatible with MDZ853 nozzles
- Made for Billets, Blooms, Slabs and Scrap
- Can be used on hot and cold products
- Made to cut thickness from 120 to 600mm (4,7 to 23,6 inches / 0,4 to 1,97 feet)
Options :
- Length & fittings on request
- Head angle (90, 120, 180°, more on request)
- Pipe shielding
- Protective screen
- Trigger holder
Torch MDZ1053 :
- Compatible with MDZ1053 nozzles
- Made for scrap cutting
- Made to cut thickness from 400 to 800mm (15,75 to 31,5 inches / 1,31 to 2,62 feet)
Options :
- Length & fittings on request
- Head angle (90, 120, 180°, more on request)
- Pipe shielding
- Protective screen
- Trigger holder
Torch MDZ2053 :
- Compatible with MDZ2053 nozzles
- Made for scrap cutting
- Made to cut thickness from 800 to 2000mm (4,7 to 23,6 inches / 0,4 to 1,97 feet) – for more, contact us
Options :
- Length & fittings on request
- Head angle (90, 120, 180°, more on request)
- Pipe shielding
- Protective screen
- Trigger holder
Torch G1/G2
- Compatibles with G1/G2 nozzles
- Made to cut thickness from 3 to 900mm ( 0,12 to 35,45inches / 0 to 2,95 feet)
- Switched on by valve
Scarfing Torches
Manual Scarfing Torches:
- Compatible with hand scarfing nozzles, equipped with a wearing ring
- Pass width up to 110 mm
- Switched on by trigger
Options :
- Length & fittings on request
- Head angle (90, 120, 180°, more on request)
- Rod advance system
- Protective screen
- Trigger holder
Machine Scarfing Torches:
- Made for fast and wide scarfing
- Water cooled
- Can be mounted on an articulated scarfing robot
- On demand design
